Wilwood Dynalite/ST Road Race Front Disc Brake Kit 1988-2000 Honda Civic

Retail Price: $1,174.60 Our Price: $1,048.75
Vendor: Wilwood SKU: 140-14304

Description

Wilwood has introduced a road racing brake upgrade kit for the smaller 9.45"/240mm rotor front spindles used on many of the 1988-2000 Honda Civics. This kit is engineered for fitment inside 15.00” wheels, and delivers unyielding performance and long-cycle durability in sustained high-heat competition. 
 
The kit features Dynalite/ST calipers with four Thermlock pistons and internal damping springs for ultimate heat management and pad retraction control. PolyMatrix H compound race pads clamp over 11.00"/280mm Spec37 alloy GT-72 vane competition rotors that are mounted to the hubs with weight-saving aluminum hats. Caliper brackets, hardware, stainless braided flexlines and a detailed installation guide are included with each kit.

Forged Dynalite Big Brake Front Brake Kit (Race)

The components in this kit have been selected to deliver consistent start to finish performance on vehicles built for dedicated road course competition. No detail has been overlooked. Forged aluminum Dynalite/ST calipers, fortified with Thermlock® pistons and internal knock-back damping springs, provide high efficiency clamping force, unsurpassed heat management, and the piston retraction control that all contribute to a firm and consistent pedal through any event. Oversized 11" diameter Spec37 alloy GT series 72 vane two-piece rotor assemblies mount to the OE hub with aluminum hats adding overall system brake leverage, cooling capacity, and thermal stability in this compact yet sturdy weight saving configuration. The performance package is capped with high friction, high temperature, and long wearing Wilwood PolyMatrix H compound race pads. All premium grade fastener kits include rotor bolts and caliper to mount bracket bolts that are pre-drilled for safety lock wire. NOTES: This kit requires spindles from vehicles originally equipped with 240mm, 9.45" diameter rotors. On some models equipped with factory power brakes, upgrading to a larger bore master cylinder in the 15/16" to 1" range may be necessary. Vehicles converted to manual brakes typically have best results with a 3/4" or 13/16" bore master cylinder, all based on driver preference for travel and effort required. This kit has been verified for fitment in select 15 x 7" racing wheels configured to accommodate oversized brake packages. Interference may occur with wheels designed only around OE spec brake components. Please refer to the wheel clearance diagram to determine fitment with your specific wheels.

Honda Honda Civic 1996-2000 Coupe DX / HX Models
Honda Honda Civic 1993-1995 Coupe DX w/ Auto
Honda Honda Civic 1993-1995 Coupe DX w/ Manual
Honda Honda Civic 1996 Coupe EX w/out ABS
Honda Honda Civic 1998-2000 HB
Honda Honda Civic 1992-1995 HB Auto Excludes SI Model
Honda Honda Civic 1988-1991 HB Base
Honda Honda Civic 1989-1991 HB DX
Honda Honda Civic 1992-1995 HB Manual Excludes SI Model
Honda Honda Civic 1989-1991 HB SI
Honda Honda Civic 1992-1993 HB SI
Honda Honda Civic 1994-1995 HB SI w/ out ABS
Honda Honda Civic 1999-2000 Sedan
Honda Honda Civic 1994 Sedan DX w/ MT
Honda Honda Civic 1989-1991 Sedan DX / LX Models
Honda Honda Civic 1992-1993 Sedan DX / LX Models w/ AT
Honda Honda Civic 1992-1993 Sedan DX / LX Models w/ MT
Honda Honda Civic 1994 Sedan DX Models w/ AT
Honda Honda Civic 1995 Sedan DX w/ AT
Honda Honda Civic 1995 Sedan DX w/ MT
Honda Honda Civic 1997 Sedan Excludes EX
Honda Honda Civic 1998-1999 Sedan GX
Honda Honda Civic 1994-1995 Sedan LX w/ AT w/ out ABS
Honda Honda Civic 1994-1995 Sedan LX w/ MT w/ out ABS
Honda Honda Civic 1988 Sedan w/ AT
Honda Honda Civic 1988 Sedan w/ MT
Honda Honda Civic 1996-1998 Sedan w/ out ABS
Honda Honda Civic del Sol 1993 w/ Rear Disc
Honda Honda Civic del Sol 1995-1997 W/ Rear Disc S
Honda Honda Civic del Sol 1993-1997 w/ Rear Drum
Honda Honda CRX 1990-1991 DX
Honda Honda CRX 1988-1989 DX & SI
Honda Honda CRX 1988-1991 HF
Honda Honda CRX 1990-1991 SI


Notes:

  • Brake Kits are designed to fit OE Factory Spindles. Contact Wilwood if you are not using a factory spindle.

  • Brake Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

Reviews